Some new Geotechnical software

TAGAsoft - Slope stability, finite element analysis, pile and pile groups, settlement and consolidation, seismic analysis and foundation design software.

Free Pile Driving Programs - Geotechnical and Marine Engineering and Construction Downloads.

WinNFAD - WinNFAD may be used to Design/Check an 'Existing' (non-retrofit) pile footing or Design/Check a 'Retrofit' footing with any combination of 'Existing' piles and 'Retrofit' piles and 'Tie-Downs'.

VERSAT-P3D Group - VERSAT-P3D is a finite element program for quasi-3D nonlinear dynamic analyses of single piles and pile groups in frequency and time domain (Wu and Finn, 1997, Canadian Geotechnical Journal 34: 34-52).

UNIPILE - UNIPILE determines pile capacity, settlement and dragload due to negative skin friction for piles and pile groups. Analysis methods: effective stress, total stress, lambda method in multilayered soils.

TPILE - TPILE is a special-purpose version of the three-dimensional, non-linear analysis and design program EDP developed by Digital Structures, Inc. of Berkeley, California.

Static Pile Analysis - Static Pile Analysis provides tools for the analysis of single piles or caissons for horizontal and vertical loads using the non-linear capabilities of CSTRAAD.

SPLINTER - SPLINTER soil-pile-structure interaction program is part of the ASAS-OFFSHORE FEM software system for the analysis of offshore steel structures, but is also available separately.

SLAP - SLAP determines the interaction between a pile and soil deformed laterally by an adjacent surcharge.

SIMPLE - SIMPLE is a program for the analysis of passive loading on piles and pile groups.

Repute - Repute is a computer program for determining the response of pile groups to 3D loading, using linear or non-linear soil models.

PULL2B - PULL2B computes the deflection, rotation, moment and pressure distribution along a single pile subjected to lateral load and moment at the pile head.

PilePro - PilePro is a pile group analysis and design program. Features include: Rigid or elastic pile cap. Non-linear analysis for a single pile. Free distribution of bending value in different layers.

Pile-MP - Pile-MP calculates the bearing capacity of a single pile, or minipile, or a group of minipiles, carrying any loading combination (moment, normal force and shear).

PILECR - PILECR is a finite element program to analyse laterally loaded piles in clay soils using elastic - creep model. No pre or post processors.

PileClash - PileClash is an MS-Excel worksheet that checks for close passes between piles. Useful for congested pile areas where the actual length of piles may be indeterminate.

Pile Group Analysis - Pile Group Analysis provides tools for the analysis of pile groups for loads in all degrees of freedom using the non-linear capabilities of CSTRAAD.

Pile Cap - Pile Cap provides facilities for the design of pile caps. It analyses up to 80 piles for both axial and biaxial bending moments. Prints the exact location of the centroid of the pile group with respect to the column location.

Piglet - Piglet allows analysis of the elastic response of pile groups, under working load conditions, to provide stiffness and flexibility matrices for the pile cap (including torsional modes),....

PC-PGROUP - PC-PGROUP analyses pile groups at working load by the boundary element method of Banerjee and Butterfield. Input consists of: geometry of the piles, pile stiffness, soil stiffness profile (linearly elastic, homogenous or two layered),...

PC-MPILE - PC-MPILE is a program for the analysis of pile groups subject to a general 3D loading applied to the pile cap. Model includes: up to 100 piles, up to 20 loading conditions, data validity check.

MFoundation - MFoundation is a tool for code-based design and verification of bearing piles, tension piles and shallow foundations. For pile design it requires input data from Cone Penetration Tests (CPT).

Mat3D - LTBASE is used for the analysis of laterally loaded piles constructed on slopes. It incorporates a procedure for including the contribution of base resistance in the case of large diameter piles.

LTBASE - LTBASE is used for the analysis of laterally loaded piles constructed on slopes. It incorporates a procedure for including the contribution of base resistance in the case of large diameter piles.

LPILE Plus for Windows - LPILE Plus is a program for the analysis of piles and drilled shafts under lateral loads. The program computes deflection, shear, bending moment, and soil response with respect to depth in non-linear soils.

LLP99 - LLP99 carries out the analysis of a laterally loaded pile modelled as a beam on elasto-plastic springs.

GROUPSET - GROUPSET is a program to calculate the static vertical stiffness and settlement of vertical piles and pile groups in layered media.

GROUP/PSI - GROUP/PSI is a program for calculating the load distribution on piles in a group. The program is most suitable for bridge foundations or other similar rigid structures.

GROUP 3D - GROUP 3D is a design tool for analysing the behaviour of piles in a group subjected to both axial and lateral loadings.

GROUP 2D - GROUP 2D is used to determine the distribution of loads to piles in a symmetrical group installed either vertically or on a batter. The piles can be connected to the pile cap as fixed, pinned, or elastically restrained.

GEOnac-PSI - GEOnac-PSI is a FEM program for the analysis of pile-soil interaction problems for both axial and laterally loaded piles. The material models include: linear elastic model for beam elements;...

GASGroup - GASGROUP is a numerical program using the closed form solutions developed by Guo (1997), Guo and Randolph (1997, 1998, 1999), designed for predicting behaviour of vertically loaded single piles and pile groups.

Foundation3D - Foundation3D is a spread and combined footing analysis/design tool for soil or pile supported foundations for industrial equipment such as horizontal exchanger, horizontal vessel, vertical vessel or tower,...

FB-MultiPier - FB-MultiPier is a nonlinear finite element analysis program capable of analyzing multiple bridge pier structures interconnected by bridge spans.

DEFPIG - DEFPIG calculates the deformations and load distribution within a group of piles subjected to vertical, horizontal and moment loading.

Combined3D - Combined3D is a general spread and combined footing analysis/design tool for soil or pile supported foundations. It has the following features: Allows multiple system of units for input and output - English,...

COM624P - COM624P for the analysis of stresses and deflections of piles or drilled shafts under lateral loads. It is based on the widely used p-y curve method and solves equations giving pile deflection, rotation,...

APRAF - APRAF, using a combination of finite layer and finite element methods to model layered soil, raft and piles, can be used to calculate the displacements, bending moments and shear forces in rafts and piles.

ALP99 - ALP99 carries out the analysis of an axially loaded pile modelled as an elastic pile supported by elasto-plastic springs.

ALP - ALP analyses the soil-structure interaction of a laterally loaded pile. The program represents the pile as a series of elastic beam elements and the soil as a series of independent springs.

All-Pile - All-Pile is for analyses of vertical, and lateral capacities of single and group piles. The program calculates vertical settlement and lateral deflection of piles.

3DPILE - 3DPILE solves problems related to three dimensional pile groups subjected to axial, lateral, and torsional loading using p-y curves, t-z curves and soil response curves for torsional resistance.